Homend Hydraulic Pressure Gauge Kit Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Test Kit for Excavator Construction Machinery, 250/400/600Bar/11Couplings

Specification:

Material: Stainless Steel

Pressure Gauge 1: φ60mm-3625PSI(250Bar/25MPa)
Pressure Gauge 2: φ60mm-5800PSI (400Bar/40MPa)
Pressure Gauge 3: φ60mm-8700PSI (600Bar/60MPa)
Connect Hose Length: 1M / 39″
Pressure Gauge Screw Size: G 4/1
Quick Release Connector: G1/8
Test coupling 1: G 1/4
Test coupling 2: Z 1/4
Test coupling 3: G 3/8
Test coupling 4: G 1/8
Test coupling 5: M 10*1
Test coupling 6: M 10*1.25
Test coupling 7: M 1/8
Test coupling 8: M14*1.5
Test coupling 9: 7/16
Test coupling 10: 9/16

Package Content:

3 X Pressure Gauge
10 X Couplings
1 X Quick Connector
3 X Connect Hose
1 X Aluminum Carry Case

Use and Maintenance

1) In using, pressure connector should be installed in the test site of pressure measurement system. The connecting thread of pressure measuring joint should be matched to the threads of the pressure measuring hose.
2) The pressure device can be also measured when the hydraulic system is running, but user should confirm that the pressure point of the pressure gauge is within the range.
3) The pressure device should be placed flat, the distance between pressure measuring point and the pressure device does not exceed 85% of hose length.
4) In measuring pressure, the pressure measurement hose should be connected to the corresponding pressure gauge joint, and then unscrew the dust cover of pressure measuring tie-in, connect the other end of the pressure measuring hose to the pressure connector, user can carry out pressure detection.
【A Complete Set:】 : This is an accurate hydraulic pressure testing set, include: 3 pressure gauge, 3 connect tube, 10 couplings and 1 quick release coupling. It can provide reliable pressure measuring results, very easy to connect and use. Stainless steel couplings, anti-rust, leakage-proof and better than those aluminum products on market.
【Specification:】Include 3 pressure gauge ranges: 0-25Mpa, 0-40Mpa, 0-60Mpa;10 stainless steel test couplings: G 1/4, Z 1/4,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/16, 9/16.
【Precise:】G1/8 quick connector compatible for Caterpillar machines;Precise gauge set, reliable results.
【Suitable for】: Suitable for most excavator and machine on market;Portable to carry with aluminum case.
【Wide Application】: Test tube connects the gauge for direct reading;Wear-resistant tube, impact-resistant with good elasticity;Widely used at construction, machinery, shipping, mining, petroleum, chemical industry etc.