PC Products PC-Woody Wood Repair

Two-part epoxy paste to replace missing or rotted wood is resistant to mildew, dry rot, UV light, and fresh and salt water
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F
High tack helps reduce drips and sags while hardening. PC-Woody part B must be mixed with PC-Woody part A in equal volumes. The PC-Woody part B will not cure by itself and must be removed and mixed properly. It is not recommended to mix PC-Woody in teaspoon size increments or smaller, simply because of the likelihood of an ‘off-ratio’ mix
Provides work time of 30 to 40 minutes (at 70 degrees F) to allow for adjustments
Can be painted, stained, and machined after fully cured
This epoxy is made from real wood and has many characteristics of wood
PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes
High “wet grab” or tack of PC-Woody makes overhead and sidewall work easy without drip or sag
Excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and chemicals present in pressure-treated wood
Note: PC-Woody will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt